Latest little job completed, none of the lights were working on the centre console, so a little digging revealed the pcb's with all the lamps failed. The lamps are not available as spares and the boards were £90 each which I thought was a rip off. This is my solution.
[/URL]
Before there are two like this, one above the hazard switch row, one above the spoiler and diff lock. I have used pre ballasted leds as these will work on 12v with no shunt resistor needed, the only thing to really look out for is the position on the tracks of the + and - so you can bend the legs of the resistor to the correct polarity.
[/img]
I used red on the top row and clear on the bottomwith red on the diff switch
[/URL]
Finished article[/img]
Before there are two like this, one above the hazard switch row, one above the spoiler and diff lock. I have used pre ballasted leds as these will work on 12v with no shunt resistor needed, the only thing to really look out for is the position on the tracks of the + and - so you can bend the legs of the resistor to the correct polarity.
[/img]
I used red on the top row and clear on the bottomwith red on the diff switch
Finished article[/img]