Ghianightmare
Montreal
- Joined
- 25 Apr 2017
- Messages
- 608
Hi,
I received 2 refurbished rear track rods with different part numbers from Hartech. As they are closed for the weekend and I am planning to do the work tomorrow Sunday, can anyone tell me if part number 996-331-045-10 ( casting number 996.331.245.10) can be used with a 997 part number 997-331-045-03 (casting number 997.331.245.03) as Hartech sent me one of each. The bushing is slightly different, but dimensions as the same...
The older workshop manual available on this forum FAQ says older types can't be mixed, but I don't have any literature on these later P/Ns.
Any help is appreciated, otherwise I'll wait for Hartech to open on Monday. I'll probably be in the shlt at that stage anyway if the anti roll bar bolts snap... :roll: I have been dousing them with penetrant over the summer in preparation and will heat them tomorrow before going near them with a spanner.
I received 2 refurbished rear track rods with different part numbers from Hartech. As they are closed for the weekend and I am planning to do the work tomorrow Sunday, can anyone tell me if part number 996-331-045-10 ( casting number 996.331.245.10) can be used with a 997 part number 997-331-045-03 (casting number 997.331.245.03) as Hartech sent me one of each. The bushing is slightly different, but dimensions as the same...
The older workshop manual available on this forum FAQ says older types can't be mixed, but I don't have any literature on these later P/Ns.
Any help is appreciated, otherwise I'll wait for Hartech to open on Monday. I'll probably be in the shlt at that stage anyway if the anti roll bar bolts snap... :roll: I have been dousing them with penetrant over the summer in preparation and will heat them tomorrow before going near them with a spanner.