I have a set fitted.
I was torn between these and Recaro Pole Positions, original GT3 are to rich for my blood, but I really wanted the OEM look.
As I was intending to use on track my concern was the quality and although I could find lots of people who had fitted them and were happy with the quality, none actually tracked their cars where the structural loads would be higher.
However I found the thread on Pistonheads where the doubters who were questioning the quality were taken to school, this was enough for me to try a set.
So far no issues, they are a narrow seat so dependent on your build may be a little snug. Track performance is much better than standard seats in that they hold you in position, and that position is more focused. - That said if your pushing on you still move around a little and ideally harnesses are required, which means a cage.
My biggest concern is the seat runners. (I used the D911 heavy duty mounting kit, I searched hard for other solutions but could not find any) The side mounts are heavy duty, no issues, however the sliders are pretty sh*tty and the way in which they bolt to the car, in my eyes, could be more substantial. - The fixings provided, nuts and bolts are also garbage and I replaced mine with HT bolts and nyloc nuts.
HTH, if you want pictures or any more specific info let me know.
Marky, they look ace! :thumb: