Black-Adder
Silverstone
- Joined
- 21 Nov 2016
- Messages
- 125
Not sure if this has been covered before, anyway I finally got round to installing my Dension 500 Lite and thought I would post a few images of the install.
No holes drilled, simply plug and play.
1. Unplug fibre optic connection from CDC and plug direct into Dension.
2. Run cable through the bulkhead via rubber grommet, the cable will come out just above brake pedal.
3. Connect the power cable to a permanent live power outlet, i used a direct feed from battery at the unit has an inline fuse.
4. Secure Dension unit, I used Velcro strips to save making any holes in the plastic.
No more Cd's
No holes drilled, simply plug and play.
1. Unplug fibre optic connection from CDC and plug direct into Dension.
2. Run cable through the bulkhead via rubber grommet, the cable will come out just above brake pedal.
3. Connect the power cable to a permanent live power outlet, i used a direct feed from battery at the unit has an inline fuse.
4. Secure Dension unit, I used Velcro strips to save making any holes in the plastic.
No more Cd's