Boxstercol
Trainee
- Joined
- 4 Jun 2013
- Messages
- 97
Hiya all,
Going to have a go at replacing the rear discs & pads on my 2005 987 S.
Bought Brembo discs / pads, wear sensors & backing plates from ECP using their 50% off discount code. Plus two new caliper bolts / disc screws from OPC.
Doesn't seem like too difficult a job, however I have got a concern over removal of caliper bolts & adjustment of the handbrake after. I'm not chsnging them due to wear, but because they are corroded.
Any tips gratefully received!
Thanks in advance.
:thumb:
Going to have a go at replacing the rear discs & pads on my 2005 987 S.
Bought Brembo discs / pads, wear sensors & backing plates from ECP using their 50% off discount code. Plus two new caliper bolts / disc screws from OPC.
Doesn't seem like too difficult a job, however I have got a concern over removal of caliper bolts & adjustment of the handbrake after. I'm not chsnging them due to wear, but because they are corroded.
Any tips gratefully received!
Thanks in advance.
:thumb: