Monkeynutz
Well-known member
- Joined
- 5 Oct 2016
- Messages
- 487
Hi all some advice needed please.
Any recommendations for a 1-Step polish and pad combination process for removing light swirls and small light scratches from paintwork using a DAS6 Pro Plus or similar? There are a ton of products out there and I don't know where to start and some guidance would be appreciated. My current thinking is a green hex logic pad and VSS by Chemical Guys?
I have decided I want to enjoy the pleasure of making my car gleam rather than hand it over to a detailer, if I can help it. I am sure the car was detailed by the OPC prior to sale so the paint is in pretty good order so not rushing to get it done.
I am just starting out with this detailing malarkey and am rather enjoying it. I have recently thrown out the cheap Halfrauds polishes and Turtlewaxes and have now adopted the 2 bucket wash method, invested in wash mitts and microfiber cloths, drying towels etc as well as waiting for a further delivery from Bilt Hamber
At the weekend I cleaned the car and finished off with some Colinite 476 and I love the finish and it was so much easier to use than some of the crap I have used in the past! However, on closer inspection, under the sunlight, I can see very light swirls and scratches on the paint and these are now bugging me so at some point I would like to tackle them and really make the car pop.
As the car lives outside I also aim to eventually give it some longer lasting protection with something like cQuartz UK or is this kind of stuff best left to the pros?
Any recommendations for a 1-Step polish and pad combination process for removing light swirls and small light scratches from paintwork using a DAS6 Pro Plus or similar? There are a ton of products out there and I don't know where to start and some guidance would be appreciated. My current thinking is a green hex logic pad and VSS by Chemical Guys?
I have decided I want to enjoy the pleasure of making my car gleam rather than hand it over to a detailer, if I can help it. I am sure the car was detailed by the OPC prior to sale so the paint is in pretty good order so not rushing to get it done.
I am just starting out with this detailing malarkey and am rather enjoying it. I have recently thrown out the cheap Halfrauds polishes and Turtlewaxes and have now adopted the 2 bucket wash method, invested in wash mitts and microfiber cloths, drying towels etc as well as waiting for a further delivery from Bilt Hamber
At the weekend I cleaned the car and finished off with some Colinite 476 and I love the finish and it was so much easier to use than some of the crap I have used in the past! However, on closer inspection, under the sunlight, I can see very light swirls and scratches on the paint and these are now bugging me so at some point I would like to tackle them and really make the car pop.
As the car lives outside I also aim to eventually give it some longer lasting protection with something like cQuartz UK or is this kind of stuff best left to the pros?