decgraham
Albert Park
- Joined
- 17 Sep 2008
- Messages
- 1,664
Hi All,
Having done the lower covers my next job is the upper ones. However, looking at the 6 gaskets there are 2 holes in each so I would assume that I require 12 new bolts. In the PET for item 20 it says 38, OK, 22 for the lower covers that leaves 16. If I'm right with 12 for the two covers where do the other 4 go :dont know: I can't seem to see them in the PET on page 27.
Also if anyone can point me in the direction of a "DIY how to" I'd very much appreciate it. When I had them done by my Indy in Q8 about 10 years ago I remember him saying that the upper ones where more difficult than the lowers. The lowers IMHO were a peace of cake :wink:
ATB
Update:
Just had a look at a new upper Camshaft Cover on Type 911 and I see that there are 8 bolts per cover. 16 bolts to order then
Having done the lower covers my next job is the upper ones. However, looking at the 6 gaskets there are 2 holes in each so I would assume that I require 12 new bolts. In the PET for item 20 it says 38, OK, 22 for the lower covers that leaves 16. If I'm right with 12 for the two covers where do the other 4 go :dont know: I can't seem to see them in the PET on page 27.
Also if anyone can point me in the direction of a "DIY how to" I'd very much appreciate it. When I had them done by my Indy in Q8 about 10 years ago I remember him saying that the upper ones where more difficult than the lowers. The lowers IMHO were a peace of cake :wink:
ATB
Update:
Just had a look at a new upper Camshaft Cover on Type 911 and I see that there are 8 bolts per cover. 16 bolts to order then