CarreraMonkey
Mugello
- Joined
- 2 Sep 2013
- Messages
- 2,188
Ok, so I had to have a new pse actuator fitted last week as the original one was toast and was leaking.
However my pse still is sent working.
:dont know:
The vacuum is definitely working, so the actuators are closed, but they won't open at 4000 rpm. They don't open even if I disconnect the brown plug.
Obviously if i pull the vacuum pipes they open.
So what's failed? Is there a solenoid that needs replacing?
Slightly miffed that after spending a few hundred quid on a new lambda sensor and actuator, i still have an outstanding issue with the pse.
However my pse still is sent working.
:dont know:
The vacuum is definitely working, so the actuators are closed, but they won't open at 4000 rpm. They don't open even if I disconnect the brown plug.
Obviously if i pull the vacuum pipes they open.
So what's failed? Is there a solenoid that needs replacing?
Slightly miffed that after spending a few hundred quid on a new lambda sensor and actuator, i still have an outstanding issue with the pse.