Mikhailichenko
Active member
- Joined
- 24 Jun 2014
- Messages
- 42
The memory seats on my 996 have not worked since I collected it last week. The seat movement was fine but I was unable to store positions to the buttons or keys.
I popped the trim off that houses the button panel. This took a bit of wiggling and firm pressure to come off. There were no screws holding the panel on but I noticed two holes on the inside that may at one time have had screws.
Once the panel was off the problem was apparent. The little black connector had come off the button panel. I replaced this and hey presto I have memory seats. The panel was replaced with firm pressure. All in all about 5 - 10 minutes work.
I popped the trim off that houses the button panel. This took a bit of wiggling and firm pressure to come off. There were no screws holding the panel on but I noticed two holes on the inside that may at one time have had screws.
Once the panel was off the problem was apparent. The little black connector had come off the button panel. I replaced this and hey presto I have memory seats. The panel was replaced with firm pressure. All in all about 5 - 10 minutes work.