Having toyed with the idea for ages after reading different posts and websites, I finally drilled loads of 20mm holes in my airbox over the weekend. I took the cover off and just did about 6 holes to start. I went for a drive and I could just about hear the difference and slightly feel it. It wasn't too loud though so I then riddled that air box cover to within an inch of it's life. I must have 30 holes in it. I then went for another drive ....... AWESOME .... in the past I have paid £200+ for induction kits for previous cars and not had anywhere near the results. The car sounds better and feels better too, I swear it is noticably more responsive. I had read that this is a 'must do' mod and it really is. If you haven't done it yet, do it today! It would have taken less than 5 minutes if I had just drilled all the holes without going for a test drive in between.
I also fitted some new door handles like these
http://cgi.ebay.com/ebaymotors/PORSCHE-911-964-993-CARRERA-ALUMINUM-INNER-DOOR-HANDLES_W0QQcmdZViewItemQQcategoryZ33696QQihZ011QQitemZ320087294325QQrdZ1QQsspagenameZWDVW
This would have taken me 10 minutes if I hadn't let the little rod that pulls something to open the door come out of the door completely! I then had to spend about an hour taking my door apart so I could reconnect the little blighter again. They are a cool looking little asset to the interior though. I felt the original handles let it down and these are a good quality item that don't look as old fashioned as some of the alloy ones on ebay. With the dollar being weak at the moment these work out at about £55 (Inc P&P) which is not great but still good compared to others.
Migration info. Legacy thread was 122254
I also fitted some new door handles like these
http://cgi.ebay.com/ebaymotors/PORSCHE-911-964-993-CARRERA-ALUMINUM-INNER-DOOR-HANDLES_W0QQcmdZViewItemQQcategoryZ33696QQihZ011QQitemZ320087294325QQrdZ1QQsspagenameZWDVW
This would have taken me 10 minutes if I hadn't let the little rod that pulls something to open the door come out of the door completely! I then had to spend about an hour taking my door apart so I could reconnect the little blighter again. They are a cool looking little asset to the interior though. I felt the original handles let it down and these are a good quality item that don't look as old fashioned as some of the alloy ones on ebay. With the dollar being weak at the moment these work out at about £55 (Inc P&P) which is not great but still good compared to others.
Migration info. Legacy thread was 122254