Phil 997 said:
Max is the 12mm spacer hubcentric , also what disks did you use the reason I ask is that I was persuaded to use an unknown brand of Disks and when fitted I had terrible wheel wobble so removed them and returned them brought pagid fitted them and job done no wobble :thumb: again a symptom of using nasty made in the Far East rubbish , I am realising that the Far east is very good at making things that look right straight rip off replicas, but do no R&D or Quality control just copy but use inferior materials or less precise machining as the focus is purely on cheap build cost and as such they just dont do the job. :nooo: :nooo:
Phil, I have proper TPI 12mm hubcentric magnesium alloy spacers all round, but it's possible that I have dirty hubs or some such, so I'll remove them and try running without to eliminate them as an issue.
I also have Brembo discs: although I might not fit actual Porsche boxed parts, I'll certainly use OEMs like Brembo. The wheel wobble is pretty new, so I'm not sure what's going on. They didn't wobble at the track, and I wasn't being hard on the brakes, as it was pretty wet out there (see above pictures from Alastaro). Maybe there's an issue with the tyre, maybe it's flat spotted, I don't know yet. It's holding pressure. Maybe I've damaged a rim, or put the tracking out (there are plenty of bumps and potholes around here).
Anyway, tomorrow morning I'm at my indy, so we'll pull everything off and have a look around in the light and warmth of a proper garage.