pietrzj
Spa-Francorchamps
- Joined
- 19 Mar 2014
- Messages
- 309
Hi,
Has anyone upgraded their ARBs to RS on a non RS car? On the rear I suspected that as the bar goes under the wishbone, the RS drop link though longer than the C2 would not be long enough to pick up the mount on the shock, so I confirmed this by buying a cheap RS drop link and offering it up.
Does that mean its a more complex job that requires a upgrade to the shock too?
Has anybody tried this upgrade with the standard shock?
I am thinking of going M030 with the RS ARBs but I wanted to do it in stages (funding).
Can't stretch to PS10 but the Jackal looks like even these shocks needed an extension bracket to pick up the drop link.
Any advice welcome
JanP
P.s if anyone knows the part number for the poly bush upgrade for the rear lower control arm that would be a bonus. A lot of the kits (Design911, Superflex, powerflex, elephant etc) out there, only seem to show 2 of the control arms along with the A wishbone, rather than the 3 control arms on the 993 (though I admit they are not all called control arms in the PET drawing). But I do want to change the bushes in all the "wishbones/arms" on the rear now that I have done the front of the car.
Has anyone upgraded their ARBs to RS on a non RS car? On the rear I suspected that as the bar goes under the wishbone, the RS drop link though longer than the C2 would not be long enough to pick up the mount on the shock, so I confirmed this by buying a cheap RS drop link and offering it up.
Does that mean its a more complex job that requires a upgrade to the shock too?
Has anybody tried this upgrade with the standard shock?
I am thinking of going M030 with the RS ARBs but I wanted to do it in stages (funding).
Can't stretch to PS10 but the Jackal looks like even these shocks needed an extension bracket to pick up the drop link.
Any advice welcome
JanP
P.s if anyone knows the part number for the poly bush upgrade for the rear lower control arm that would be a bonus. A lot of the kits (Design911, Superflex, powerflex, elephant etc) out there, only seem to show 2 of the control arms along with the A wishbone, rather than the 3 control arms on the 993 (though I admit they are not all called control arms in the PET drawing). But I do want to change the bushes in all the "wishbones/arms" on the rear now that I have done the front of the car.