Porsche 911 UK Enthusiasts Online Community Discussion Forum GB

Welcome to the @Porsche911UK website. Register a free account today to become a member! Sign up is quick and easy, then you can view, participate in topics and posts across the site that covers all things Porsche.

Already registered and looking to recovery your account, select 'login in' and then the 'forget your password' option.

Alignment settings

Runcible

New member
Joined
17 Feb 2016
Messages
19
Where would I find factory settings for an 02 C2

I appear to currently have -0.74° of camber on the front. -2.25° camber on the rear. Which seams a little aggressive for road driving

TIA
 
^^^^^ As stated by Robert but also any decent alignment place will have the factory settings on the system, to work to.

Here's my before and after but it is rather pointy for bumpy, chewed up roads.

I've never seen more Rear camber than front on a RWD 911. A good starting point is about half a degree more on the front. I like at least 1.5 degree on front, hence 1 degree on back.

My latest setup is below but it's just for reference (we are all different) and if the car is a daily you'd want 1-1.5 on the front I'd guess. Again, a good geo guy will ask your uses for the car and advise.

 
So the Renntech thread suggests factory is -0.25° Front and -1.25° ?
But it's a 4wd setting and possibly not relevant to me?
 

New Threads

Forum statistics

Threads
124,587
Messages
1,441,779
Members
49,012
Latest member
Milno
Back
Top